Properly Sizing the AC/Heating System in Your New Home

While there are many aspects of the home building process that may seems uncomplicated, or some that you may be familiar with, there are many that we take for granted and never really get to know the in/outs of the process. One of the systems in your home, maybe the one you would miss the most if not installed/sized properly, is your HVAC system. Here in Steeplechase Terrace our HVAC systems are installed and warrantied by Airtron of Houston. We have found them to be reliable in the installation as well as service and warranty issues after the new homeowner moves into their new home. While the installation of the system and duct work takes several days, and requires numerous inspections, the process of selecting the size of the HVAC system, duct placement, and return air vents begins long before the home has started in the construction process. The system used to calculate the size needed for a homes HVAC system is known as a ‘Manual J’. The following are the details of how Airtron runs this calculations needed to make sure your system is sized and installed properly, allowing for years of comfort for you in your new Bayway Home.

The Bible – Manual J

Calculating heat gain is really complex. You must use a booklet called Manual J. This booklet takes you step by step through the process making you account for each and every source of heat. Many scientists have worked over the years to formulate the tables, formulas, and values that combine to form this bible of the air conditioning industry.

You can purchase a copy – and I URGE you to do so – if you want to really understand how air conditioning works. The ordering instructions can be found if you keep on reading.

The manual is actually a rather technical booklet, but if you follow instructions well, you can easily work out a heat gain computation of your own. You will at least get close. Don’t get bogged down in all of the technical mumbo-jumbo within the manual. Simply take your measurements and crunch some numbers.

Finding a Professional

The same outfit that publishes Manual J also has a new program that will allow you to locate a professional who is dedicated to a high professional standard. They have a new certification program called the Air Conditioning Excellence (ACE) Technician Certification Program. Air conditioning contractors who are ACE certified meet a high standard because they have completed a comprehensive, industry education and examination process and have demonstrated technical expertise with numerous types of air conditioning (and heating) units in the field. They also have a thorough understanding of non-technical and safety issues that impact the equipment in your home. If you want a professional in your home, I suggest you look for someone who has this ACE certification.

Oversizing Equipment

Some people want to oversize their equipment so they are assured of being cool on those hot days. This can be a big mistake. You actually want to undersize your equipment ever so slightly. Researchers at Texas A & M found that air conditioners that were undersized by 10 to 20 percent are more efficient and more effective at removing water vapor (humidity) from your indoor air.

Now I will agree with them to a point, but I don’t know if I would undersize my own equipment to the 20 percent benchmark! I would go 5 percent at the most….a totally unscientific approach since I have always sized the equipment on my jobs to match or slight exceed the calculated heat gain.

Oversizing a unit causes problems because the unit doesn’t run long enough. You want your air conditioner to run for 15 – 20 minutes at a time. This allows the recirculating air to come into contact with the cold coil inside the air handler. This is how humidity is removed from the air. You will feel most comfortable when as much moisture is squeezed from the interior air as is possible. Short cycling air conditioners don’t remove humidity well at all.

Calculating Heat Gain

The first thing you need to do to calculate the heat gain of your house is to purchase a copy of Manual J. This booklet is very likely at your local library and/or you may be able to borrow a copy from a local air conditioning distributor. The point I am trying to make is that it contains 116 pages of tables, examples, and other valuable information that is physically impossible for me to include in this tiny Bulletin.

My copy of Manual J has an awesome example computation. You can see the floor plan of the house and the computation sheet. This allows you to see how they arrived at all of the individual heat gain BTU’s. The example computation will allow you to easily compute your own house’s heat gain.

The following instructions are meant to HELP you make sense of the rather technical Manual J. Without the following notes, I’m afraid that you might give up in frustration.

You can purchase your own copy of Manual J Abridged Edition by contacting the following Association. The cost ($65) is steep, but there is no other booklet like it. The 561 page, Manual J Residential Load Calculation Full edition is $130:

Air Conditioning Contractors of America (ACCA)
2800 Shirlington Road
Suite 300
Arlington, VA 22206
Call Toll Free – 888-290-2220

Calculate Temperature Difference

OK, it gets much hotter on average in Las Vegas or Dallas than it does in Chicago. This is important as you need to keep in mind the heat intensity when sizing AC. Manual J has extensive tables that will list your city or town or one very near you. There is a temperature listed that will usually only be exceeded 2.5% of the time. In other words, it can get hotter than that temperature but only for short periods of time. You don’t want to design your system for worst case scenarios. If you do this, it will be oversized.

75 to 78 degrees is the recommend interior temperature. You subtract 75 degrees from the temperature listed for your city. This is your design temperature. You will have to round this value to some factor of 5 for all subsequent calculations. In other words, if you arrive at 23 degrees, call it 25.

Heat Gain Through Windows / Glass Surfaces

The largest and most direct source of heat gain is glass. You know this anytime you have stood in front of a window on a hot sunny day. You feel like an egg in a skillet.

Heat gain through glass is affected by the compass direction the glass faces, whether or not the glass is shaded by an awning or trees, the layers of glass, and the total surface area of the glass. This aspect of your calculations is critical. If you make a mistake here, it can be big. Take accurate measurements and be sure of your compass directions.

Your BTU heat gain calculations start once you have measured all of your windows and noted all of the other data. I prefer to add up all of the square footages of the glass that face a certain compass direction. I then only have to go through the calculation one time.

Locate the proper table(s). You will need to know your design temperature, the compass direction, type of shading, and glass thickness. Once you zero in and find the right values, you will cross reference these to a number that is called the “Heat Transfer Multiplier” (HTM). You take this number and multiply it times the square footage of glass surface for that particular compass setting and shading requirements. The resulting number is the number of BTU’s that you are “gaining” through your glass. Write this number down as you will be adding up ALL of the BTU’s to get to your total Heat Gain. Note the vast difference in the numbers between similar windows that face West and ones that face North.

Heat Gain of Exterior Doors

You now proceed through the same exercise for your exterior doors. You will be asked to select a door type and then find your design temperature and cross reference once again. Use this HTM and multiply it times the total square footage of exteriordoortypes. Once again the resulting total will be BTU’s of heat gain from the doors.

Heat Gain Through Walls, Ceilings and Floors

You will need to follow the same steps you did in the above exercises to get the BTU heat gain from all other surfaces that are in contact with the hot, humid outdoor air. This simply requires accurate measurements on your part and an investment of time. Do it on a step by step basis following all of the steps in Manual J.

Air Infiltration

All houses leak air. Old houses tend to leak more air than newer ones that are of moderate to high quality. There is a special calculation that you must do to find out the BTU’s of heat gain your house experiences from air infiltration. You basically have to calculate the total cubic foot area of your house multiply this times .40 and divide the result by 60. This gives you the cubic feet per minute (CFM) of air infiltration. You multiply this final CFM value time the HTM value on the Air Infiltration table. Having fun yet?

Latent Heat Gains

Manual J will then walk you through a process of determining some hidden heat gain sources. The occupants of the building create heat as do appliances and light fixtures. All of this – even though it is not great – must be accounted for.

The net result of all of this effort is a total heat gain which should be somewhere in the neighborhood of tens of thousands of BTU’s. My own home has a total heat gain of about 68,000 BTU’s. Remember, you divide the total BTU’s by 12,000 to reduce the BTU heat gain into tons of AC. Take your time with the calculations and you will be rewarded. The entire process should not take you over 3 hours.